x

BAM !

Abonnez-vous pour ne plus y penser.

Des indispensables qui changent la vie, pour que changer la couche soit toujours aussi facile. Livrés directement chez vous.

Box d'abonnement Liberté

17,59 €23,96 €

Des indispensables qui changent la vie, pour que changer la couche soit toujours aussi facile. Livrés directement chez vous.

x

Ajouter Au Panier

Plus que 55,00 € pour profiter de la livraison gratuite

Vous bénéficiez de la livraison gratuite

Total

0,00 €

On vous recommande

Fit guide

Partager

  • Bambino Mio
  • Product
  • 04 / 06 / 2023

How easy it is to use reusable diapers?

Reusable diapers really aren’t too different from single-use diapers (apart from all the great features of course) and if you follow a few of our simple steps, you’ll be fitting them like a pro before you know it!

Our fit guide video explains everything you need to know to get the perfect fit.

Fitting your diaper – some simple steps

  1. Adjust the poppers to get the right fit. Doing this before you change your wriggly baby will make things a lot easier.
  2. If you’re using one, place a liner in the centre of the diaper.
  3. Lay your baby down on the open diaper.
  4. Pull the front up and secure using the adjustable tabs.
  5. Check that the boosters and fabric are all tucked inside and that the elastic edge sits in the leg line.
  6. For a comfortable fit you should be able to slide two fingers easily into the waistband at the front.

How do I use the poppers?

Get your poppers into the right position before each diaper change – it’s a lot easier when you don’t have a wriggly baby in the diaper.

If you have a newborn baby you’ll need to use the bottom set of poppers, attaching them to the closing top set. Once your baby is a toddler you’ll probably have no need to use the poppers at all however the adjustable tabs at the front will allow you to alter the fit as their shape changes.

Problem-solving

If you experience leaks, it's highly likely you need to make some adjustments to the way your diapers are fitting. Your baby may have had a growth spurt since the last time you checked the fit so it’s worth going through some checks again.

If their clothing is becoming a little tight then this can cause the diaper’s absorbent core and boosters to become compressed which will squeeze out some of the liquid that they are designed to hold.

Another very common reason for leaks is that your baby might require a little more absorbency than they did before. Take a look at our Booster guide to decide which option might work best for you.

Sometimes it’s also possible to have a bit of a build-up of creams or detergents in your diaper. A strip wash is a good way to restore your diapers to their best performance